Semi Open Body Manual Pinch Valve, Gujarat, India.

Semi Open Body Manual Pinch Valve

• SIZE 15MM TO 400MM –
• DRILLED TO ANY STANDARD – DIN, ANSI, BS, IS, OR AS REQUIRED.
• PRESSURE UPTO 25 BAR – IN CLOSED & OPEN POSITION –
• SLEEVE OPTIONS – NEOPRENE, NATURAL, HYPALONE, EPDM, VITON,
• HIGH ABRASSION RESISTANT – SPECIAL INVENTED – HIGHLY ELASTIC, SPECIAL EXTRA HIGH PRESSURE MOULDED (FIVE TIMES BETTER ABRASSION RESISTANT & LONG LIFE THAN ANY RUBBER SLEEVE)

General Features & Highlights

- SEAT LESS & GLANDLESS

- EASILY REPLACABLE ELASTOMERIC SLEEVE.

- ELASTOMERIC SLEEVE HAVE FOUR REINFORCED PULLING LUGS

- FLANGED ENDS & DRILLED TO DIN, ANSI, BS, IS, OR AS REQUIRED.

- CONSTRUCTION TO HANDLE ABRASIVE CORROSIVE MEDIA.

Range:

SIZE RANGE FROM 15MM TO 400MM –

ATTN – WE HAVE FULL CAPACITY TO DEVELOP ANY DESIGN PINCH VALVE. AS WE HAVE ALL FACILITIES ASSOCIATED WITH PATTERN & DIE MOULD SHOP, FOUNDRY, RUBBER MOULDING SYSTEM WITH CAPACITY OF BIG SIZE RUBBER MILLING SYSTEM, BOILER, MACHINING & ASSEMBLY UNIT. i.e. FROM DRAWING TO FINAL FINISH PRODUCT AVAILABLE READY STOCK OR AT THE EARLIEST.

Part	Material
Body	C.I., C.S., S.G.Iron, Aluminium, Stainless Steel As Per Party Requirement
Pinching Bars	C.I., C.S., S.G.Iron, Aluminium, Stainless Steel As Per Party Requirement
Elastomer Sleeve	NATURAL, NEOPRENE, BUTYL, EPDM, HYPALON, VITON, SPECIAL HIGH PRESSURE   & HIGH ABRASSION VP-ABRP* SLEEVE
Spindle	AISI 410
Bridge	Cast Steel(C.S)/M.S BAR STO
Lug’s Clamp	Mild Steel (M.S)
Spindle Clamp	ALLOY STEEL
Tie Bars	POLISH BAR MILD STEEL
Wheel lock pin	Mild Steel (M.S)
Travel Limit Nut	Mild Steel (M.S)
Hand Wheel	C.I.,C.S.,S.G.Iron
Hand Wheel Nut	Mild Steel (M.S)
Lug Clamp Screw	Mild Steel (M.S)
Set Screw	Mild Steel (M.S)

Weight of Pinch valves in Kg. (approx)
Size ( MM )	15	20	25	40	50	65	80	100	125	150	200	250	300	350
Valve Weight	4.2	5.1	6.5	10	14.5	18	26	35	55	76	134	196	290	370
Sleeve Weight				0.6	1.1	1.35	2.1	2.9	4.0	5.5	11.7	14.7	21.5	28